WAVES

W AVES . INTRODUCTION In the previous Chapter, we studied the motion of objects oscillating in isolation. What happens in a system, which is a collection of such objects? A material medium provides such an example.

Here, elastic forces bind the constituents to each other and, therefore, the motion of one affects that of the other. If you drop a little pebble in a pond of still water, the water surface gets disturbed. The disturbance does not remain confined to one place, but propagates outward along a circle. If you continue dropping pebbles in the pond, you see circles rapidly moving outward from the point where the water surface is disturbed.

It gives a feeling as if the water is moving outward from the point of disturbance. If you put some cork pieces on the disturbed surface, it is seen that the cork pieces move up and down but do not move away from the centre of disturbance. This shows that the water mass does not flow outward with the circles, but rather a moving disturbance is created. Similarly, when we speak, the sound moves outward from us, without any flow of air from one part of the medium to another.

The disturbances produced in air are much less obvious and only our ears or a microphone can detect them. These patterns, which move without the actual physical transfer or flow of matter as a whole, are called waves . In this Chapter, we will study such waves. Waves transport energy and the pattern of disturbance has information that propagate from one point to another.

All our communications essentially depend on transmission of sig- nals through waves. Speech means production of sound waves in air and hearing amounts to their detection. Often, communication involves different kinds of waves. For exam- ple, sound waves may be first converted into an electric cur- rent signal which in turn may generate an electromagnetic wave that may be transmitted by an optical cable or via a .

Introduction . Transverse and longitudinal waves . Displacement relation in a progressive wave . The speed of a travelling wave .

The principle of superposition of waves . Reflection of waves . Beats Summary Points to ponder Exercises satellite. Detection of the original signal will usu- ally involve these steps in reverse order.

Not all waves require a medium for their propagation. We know that light waves can travel through vacuum. The light emitted by stars, which are hundreds of light years away, reaches us through inter-stellar space, which is practically a vacuum. The most familiar type of waves such as waves on a string, water waves, sound waves, seismic waves, etc.

is the so-called mechanical waves. These waves require a medium for propagation, they cannot propagate through vacuum. They involve oscillations of constituent particles and depend on the elastic properties of the medium. The electromagnetic waves that you will learn in Class XII are a different type of wave.

Electromagnetic waves do not necessarily require a medium - they can travel through vacuum. Light, radiowaves, X-rays, are all electromagnetic waves. In vacuum, all electromagnetic waves have the same speed c, whose value is : c = , , ms – . ( .

) A third kind of wave is the so-called Matter waves. They are associated with constituents of matter : electrons, protons, neutrons, atoms and molecules. They arise in quantum mechanical description of nature that you will learn in your later studies. Though conceptually more abstract than mechanical or electro-magnetic waves, they have already found applications in several devices basic to modern technology; matter waves associated with electrons are employed in electron microscopes.

In this chapter we will study mechanical waves, which require a material medium for their propagation. The aesthetic influence of waves on art and literature is seen from very early times; yet the first scientific analysis of wave motion dates back to the seventeenth century. Some of the famous scientists associated with the physics of wave motion are Christiaan Huygens ( - ), Robert Hooke and Isaac Newton. The understanding of physics of waves followed the physics of oscillations of masses tied to springs and physics of the simple pendulum.

Waves in elastic media are intimately connected with harmonic oscillations. (Stretched strings, coiled springs, air, etc., are examples of elastic media). We shall illustrate this connection through simple examples. Consider a collection of springs connected to one another as shown in Fig.

. . If the spring at one end is pulled suddenly and released, the disturbance travels to the other end. What has happened?

The first spring is disturbed from its equilibrium length. Since the second spring is connected to the first, it is also stretched or compressed, and so on. The disturbance moves from one end to the other; but each spring only executes small oscillations about its equilibrium position. As a practical example of this situation, consider a stationary train at a railway station.

Different bogies of the train are coupled to each other through a spring coupling. When an engine is attached at one end, it gives a push to the bogie next to it; this push is transmitted from one bogie to another without the entire train being bodily displaced. Now let us consider the propagation of sound waves in air. As the wave passes through air, it compresses or expands a small region of air.

This causes a change in the density of that region, say δρ , this change induces a change in pressure, δ p , in that region. Pressure is force per unit area, so there is a restoring force proportional to the disturbance, just like in a spring. In this case, the quantity similar to extension or compression of the spring is the change in density. If a region is compressed, the molecules in that region are packed together, and they tend to move out to the adjoining region, thereby increasing the density or creating compression in the adjoining region.

Consequently, the air in the first region undergoes rarefaction. If a region is comparatively rarefied the surrounding air will rush in making the rarefaction move to the adjoining region. Thus, the compression or rarefaction moves from one region to another, making the propagation of a disturbance possible in air. Fig.

. A collection of springs connected to each other. The end A is pulled suddenly generating a disturbance, which then propagates to the other end. In solids, similar arguments can be made.

In a crystalline solid, atoms or group of atoms are arranged in a periodic lattice. In these, each atom or group of atoms is in equilibrium, due to forces from the surrounding atoms. Displacing one atom, keeping the others fixed, leads to restoring forces, exactly as in a spring. So we can think of atoms in a lattice as end points, with springs between pairs of them.

In the subsequent sections of this chapter we are going to discuss various characteristic properties of waves. . TRANSVERSE AND LONGITUDINAL We have seen that motion of mechanical waves involves oscillations of constituents of the medium. If the constituents of the medium oscillate perpendicular to the direction of wave propagation, we call the wave a transverse wave.

If they oscillate along the direction of wave propagation, we call the wave a longitudinal wave. Fig. . shows the propagation of a single pulse along a string, resulting from a single up and down jerk.

If the string is very long compared position as the pulse or wave passes through them. The oscillations are normal to the direction of wave motion along the string, so this is an example of transverse wave. We can look at a wave in two ways. We can fix an instant of time and picture the wave in space.

This will give us the shape of the wave as a whole in space at a given instant. Another way is to fix a location i.e. fix our attention on a particular element of string and see its oscillatory motion in time. Fig.

. describes the situation for longitudinal waves in the most familiar example of the propagation of sound waves. A long pipe filled with air has a piston at one end. A single sudden push forward and pull back of the piston will generate a pulse of condensations (higher density) and rarefactions (lower density) in the medium (air).

If the push-pull of the piston is continuous and periodic (sinusoidal), a Fig. . A harmonic (sinusoidal) wave travelling along a stretched string is an example of a transverse wave. An element of the string in the region of the wave oscillates about its equilibrium position perpendicular to the direction of wave propagation.

Fig. . When a pulse travels along the length of a stretched string (x-direction), the elements of the string oscillate up and down (y- direction) to the size of the pulse, the pulse will damp out before it reaches the other end and reflection from that end may be ignored. Fig.

. shows a similar situation, but this time the external agent gives a continuous periodic sinusoidal up and down jerk to one end of the string. The resulting disturbance on the string is then a sinusoidal wave. In either case the elements of the string oscillate about their equilibrium mean Fig.

. Longitudinal waves (sound) generated in a pipe filled with air by moving the piston up and down. A volume element of air oscillates in the direction parallel to the direction of wave propagation. sinusoidal wave will be generated propagating in air along the length of the pipe.

This is clearly an example of longitudinal waves. The waves considered above, transverse or longitudinal, are travelling or progressive waves since they travel from one part of the medium to another. The material medium as a whole does not move, as already noted. A stream, for example, constitutes motion of water as a whole.

In a water wave, it is the disturbance that moves, not water as a whole. Likewise a wind (motion of air as a whole) should not be confused with a sound wave which is a propagation of disturbance (in pressure density) in air, without the motion of air medium as a whole. In transverse waves, the particle motion is normal to the direction of propagation of the wave. Therefore, as the wave propagates, each element of the medium undergoes a shearing strain.

Transverse waves can, therefore, be propagated only in those media, which can sustain shearing stress, such as solids and not in fluids. Fluids, as well as, solids can sustain compressive strain; therefore, longitudinal waves can be propagated in all elastic media. For example, in medium like steel, both transverse and longitudinal waves can propagate, while air can sustain only longitudinal waves. The waves on the surface of water are of two kinds: capillary waves and gravity waves .

The former are ripples of fairly short wavelength — not more than a few centimetre — and the restoring force that produces them is the surface tension of water. Gravity waves have wavelengths typically ranging from several metres to several hundred meters. The restoring force that produces these waves is the pull of gravity, which tends to keep the water surface at its lowest level. The oscillations of the particles in these waves are not confined to the surface only, but extend with diminishing amplitude to the very bottom.

The particle motion in water waves involves a complicated motion — they not only move up and down but also back and forth. The waves in an ocean are the combination of both longitudinal and transverse waves. It is found that, generally, transverse and longitudinal waves travel with different speed in the same medium. u Example .

Given below are some examples of wave motion. State in each case if the wave motion is transverse, longitudinal or a combination of both: Motion of a kink in a longitudinal spring produced by displacing one end of the spring sideways. Waves produced in a cylinder containing a liquid by moving its piston back and forth. Waves produced by a motorboat sailing in water.

(d) Ultrasonic waves in air produced by a vibrating quartz crystal. Answer Transverse and longitudinal Longitudinal Transverse and longitudinal (d) Longitudinal ⊳ . DISPLACEMENT RELATION IN A PROGRESSIVE WAVE For mathematical description of a travelling wave, we need a function of both position x and time t . Such a function at every instant should give the shape of the wave at that instant.

Also, at every given location, it should describe the motion of the constituent of the medium at that location. If we wish to describe a sinusoidal travelling wave (such as the one shown in Fig. . ) the corresponding function must also be sinusoidal.

For convenience, we shall take the wave to be transverse so that if the position of the constituents of the medium is denoted by x , the displacement from the equilibrium position may be denoted by y . A sinusoidal travelling wave is then described by: y x t ( . ) The term φ in the argument of sine function means equivalently that we are considering a linear combination of sine and cosine functions: ( , ) sin( cos( y x t A ( . ) From Equations ( .

) and ( . ), A and tan A       To understand why Equation ( . ) represents a sinusoidal travelling wave, take a fixed instant, say t = t . Then, the argument of the sine function in Equation ( .

) is simply kx + constant. Thus, the shape of the wave (at any fixed instant) as a function of x is a sine wave. Similarly, take a fixed location, say x = x . Then, the argument of the sine function in Equation ( .

) is constant - ω t . The displacement y , at a fixed location, thus, varies sinusoidally with time. That is, the constituents of the medium at different positions execute simple harmonic motion. Finally, as t increases, x must increase in the positive direction to keep kx – ω t + φ constant.

Thus, Eq. ( . ) represents a sinusiodal (harmonic) wave travelling along the positive direction of the x -axis. On the other hand, a function y x t ( .

) represents a wave travelling in the negative direction of x -axis. Fig. ( . ) gives the names of the various physical quantities appearing in Eq.

( . ) that we now interpret. Fig. .

shows the plots of Eq. ( . ) for different values of time differing by equal intervals of time. In a wave, the crest is the point of maximum positive displacement, the trough is the point of maximum negative displacement.

To see how a wave travels, we can fix attention on a crest and see how it progresses with time. In the figure, this is shown by a cross (×) on the crest. In the same manner, we can see the motion of a particular constituent of the medium at a fixed location, say at the origin of the x -axis. This is shown by a solid dot (•).

The plots of Fig. . show that with time, the solid dot (•) at the origin moves periodically, i.e., the particle at the origin oscillates about its mean position as the wave progresses. This is true for any other location also.

We also see that during the time the solid dot (•) has completed one full oscillation, the crest has moved further by a certain distance. Using the plots of Fig. . , we now define the various quantities of Eq.

Amplitude and Phase In Eq. ( . ), since the sine function varies between and – , the displacement y ( x,t ) varies between a and – a . We can take a to be a positive constant, without any loss of generality.

Then, a represents the maximum displacement of the constituents of the medium from their equilibrium position. Note that the displacement y may be positive or negative, but a is positive. It is called the amplitude of the wave. The quantity ( kx – ω t + φ ) appearing as the argument of the sine function in Eq.

( . ) is called the phase of the wave. Given the amplitude a , the phase determines the displacement of the wave at any position and at any instant. Clearly φ is the phase at x = and t = .

Hence, φ is called the initial phase angle. By suitable choice of origin on the x -axis and the intial time, it is possible to have φ = . Thus there is no loss of generality in dropping φ , i.e., in taking Eq. ( .

) with φ = . Fig. . The meaning of standard symbols in Eq.

( . ) y ( x,t ) : displacement as a function of position x and time t : amplitude of a wave : angular frequency of the wave k : angular wave number kx– ω t+ φ : initial phase angle ( a + x = , t = ) Fig. . A harmonic wave progressing along the positive direction of x-axis at different times.

. . Wavelength and Angular Wave Number The minimum distance between two points having the same phase is called the wavelength of the wave, usually denoted by λ . For simplicity, we can choose points of the same phase to be crests or troughs.

The wavelength is then the distance between two consecutive crests or troughs in a wave. Taking φ = in Eq. ( . ), the displacement at t = is given by y x ( .

) Since the sine function repeats its value after every π change in angle, That is the displacements at points x and at n x k are the same, where n = , , ,... The 1east distance between points with the same displacement (at any given instant of time) is obtained by taking n = . λ is then given by k λ = or k λ ( . ) k is the angular wave number or propagation constant; its SI unit is radian per metre or rad m − * .

. Period, Angular Frequency and Frequency Fig. . shows again a sinusoidal plot.

It describes not the shape of the wave at a certain instant but the displacement of an element (at any fixed location) of the medium as a function of time. We may for, simplicity, take Eq. ( . ) with φ = and monitor the motion of the element say at x = .

We then get ( , ) sin( y = − Now, the period of oscillation of the wave is the time it takes for an element to complete one full oscillation. That is T) = − sin( T) = − Since sine function repeats after every π , or ω = ( . ) ω is called the angular frequency of the wave. Its SI unit is rad s – .